NEWS CENTER

Equipment name: Waste plastic recycling treatment cracking equipment

Equipment model: ZM-2800*6600

Equipment working principle: extract the fuel oil through high temperature cracking, so that the waste resources can be used twice;

Equipment environmental protection type: environmental protection and no secondary pollution such as three waste emissions

Equipment use method.

Step 1: Feeding ---- Use conveyor belt or automatic feeder to feed raw materials into the reactor automatically, and close the feeding door after the feeding is finished.

Step 2: Heating ---- Natural gas can be made to heat the reactor evenly, and the temperature will gradually rise to about 260 degrees for about 2 hours. Cracking gas will enter the cooling system through the outlet gas port in the center of the reactor to liquefy into oil and enter the intermediate tank.

Step 3: Non-condensable gas treatment ---- The non-condensable gas (C1-C4 component) flows into the tank together with the oil. This non-condensable gas goes to the furnace through 2 water-sealed flame arrestors and 1 flame arrestor, and is fully burned off by the burner, which also saves some fuel.

Step 4: Soot treatment ---- All the soot generated by combustion is pumped by the induced draft fan to the common dust removal system for treatment. The treated soot is white water vapor without black particles, and then the water vapor will enter the industrial purification device for standard emission treatment to ensure that the final outgoing soot emissions meet the emission standards.

Translated with www.DeepL.com/Translator (free version)